How to enter the computer in Safe Mode?

Safe Mode does not load in the case of any program to start your system!
Windows operating system "safe mode" the application of

For Windows operating system security model, frequent use of computer friends certainly not unfamiliar to us, the security model is used to repair the Windows operating system-specific error model, which is not to load any driver of the minimum system environment, using safe mode to start computer, users can easily rule out the problem, repair the error.

Ways to enter Safe Mode is: restart the computer in the system before entering the Windows startup screen, press the F8 key (or restart the computer holding down the Ctrl key), in the event of the startup options menu, select "Safe Mode" can
Restart the computer in Safe Mode. Safe Mode then in the end there is what purpose? Here let us look at specific.

1. Fault Repair System

If Windows is not very stable up and running or not start, this time not to busy to reinstall the system, try to restart your computer and switch to safe mode boot, and then restart the computer, the system has been restored are not normal? If it is there is because of registry problem caused by system failures, this method is very effective, because Windows in safe mode starts automatically repair registry problem, boot in safe mode Windows is successful, the general will be in normal mode (Normal ) under the started.

2. To restore system settings

If the user is installing a new software or changed some settings, cause the system to not start correctly, but also need to enter safe mode to resolve, if it is installed the new software caused, in safe mode to uninstall the software, if are changes in certain settings, such as display resolution display settings beyond the scope, resulting in a black screen, then after entering the safe mode can be changed back, have put a screen saver password on the "Start" menu, forget the password, will lead to the normal operation of the computer, you can enter safe mode to change.

3. Delete stubborn files

We delete some files under Windows or clear the Recycle Bin contents, the system sometimes will be prompted to "a certain a file is being used, can not delete" message, It is interesting that these documents are usually not being used, then are not so that these documents Forever U.S. hard disk to occupy it? Please do not worry, restart the computer and press F8 at startup to enter Safe Mode, try to delete those stubborn files and take a look at the Empty Recycle Bin, lost! The original Windows has given up the protection of these documents, they could be deleted.

4. The elimination of the virus

Now getting many viruses, antivirus software has also been updated every day. However, in Windows normal mode sometimes does not clean thoroughly to remove the virus, because they most likely will cross-infection, and some anti-virus program can not run under DOS at that time of course we can also put the system to boot to safe mode, so that Windows loads only the most basic drivers, so starting to kill the virus to more thorough, more clean.

5. Disk Defragmenter

At defragmentation process, is should not run other programs, because other procedures whenever a disk read and write operation, Defragmenter will automatically re-start, usually in the normal Windows startup, the system will load a number of automatically activated procedures, these procedures are sometimes difficult to get people to manually turn off, Defragmenter will usually cause interference, in which case, we should restart the computer and entered safe mode, safe mode will not start any automatic startup procedures, you can Disk Defragmenter to ensure the smooth progress.

Four, WindowsXP environment into Safe Mode:

1, in the computer BIOS is loaded to open after quickly press the F8 key, in the event of the WindowsXP Advanced Options menu, select "Safe Mode";

2, if the number of system boot, select at WindowsXP startup, when the press the Enter key, it should quickly press the F8 key (preferably two hands to operate), in the event of the WindowsXP Advanced Options menu, select " Safe Mode. "

Another way:

1, in the Windows environment, click on the "start" menu, then click "Run";

2, type msconfig, then click "OK" button;

3, click the "Boot.ini" tag;

4, select "/ SAFENOOT";

5, and then click "OK" button to save exit, restart your computer;

6, after the resumption of WindowsXP and Windows2000 Advanced Options menu is similar to select "Safe Mode" you can;

7, If you want to abolish the "Advanced options menu", repeat steps 1-5 above, are different from Step 4 Deselect "/ SAFENOOT

Say you can point two, is not to say that user? That is, one is your original user, a Adminstor (may be misspelled). This is no matter, and vote for you on the original user will be able, because anyone can enter Safe Mode, Ad that are an administrator, usually a general need, your settings are generally placed yourself in that users, and this little problem and normal and very special and extremely normal ~
Maintenance and repair it is also unnecessary ... ...

Safe mode, the reason for the name because it is ultra-safe?! ~ Computer will usually start with a lot of procedures to start, taking up memory, slow down, and sometimes would affect the operation, with the result that some of the problems solved. So there in safe mode, can go to safe mode when addressing the general problem can not be resolved. Because less things to load, naturally accounting for less memory, it is safe?~

The restoration of very simple, like the exit. Start - turn off the computer - restart???~
Or turn off, the next is the general pattern directly. If it is not specifically according to F8 to enter safe mode, direct mode sign are common. Worry!