How to make a homemade smoking device

Posted Mar 05, 2009 by Sickgrl666 / comments 3 comments / Print / Font Size Decrease font size Increase font size

A guide on making a homemade smoking device from house hold items

The materials you will need are the following: (some can be substituted to fit your materials on hand)

A pair of scissors

A 20mL plastic soda bottle

Aquarium Tubing

Tin Foil                   

Two bic pens

Tweezers

Tape/Glue

What you need to do first is prepare a bowl. This is the place where your tobacco is going to go when smoked. To do so, take the cap off of the bottle and place a piece of tin foil (the size of the bottom of the bottle) on the top. Now slightly indent it with your thumb, make sure its deep enough to hold your desired amount of tobacco. Now, take your tweezers and poke 3 to 5 small holes in the tin foil at the bottom of its curve. That is where the smoke will travel into your smoking chamber.

The next step is quite easy. The smoking chamber must now be prepared. Take your two bic pens and empty them of their innards. Now take the bottom part off to where you can see clearly through them both. Next, take your soda bottle and poke two holes with your scissors (directly across from each other) towards the top of your bottle. Stick one pen in each hole angling downwards to the point where they reach from side to side and make an "X" shape in the bottle. There should be a little bit of the pen sticking out from the top holes. Tape or glue the pens in place on the bottle to make sure they won't fall and are slightly air tight.

The last step requires at least 2 feet of aquarium tubing. If one does not have enough then you can take an old video game controller and cut off its wires. Then empty them of the colored wires on the inside and keep the outer casing. Cut the tubing in half to equal length. Stick one tube in one of the pens until it can reach the bottom of the bottle (there should be a generous amount of tubing sticking outside of the bottle). Do the same thing with the other tube in the adjacent hole. These are your mouth pieces and your device is now complete.

To Smoke: Load your bowl with your tobacco. Place one tube in your mouth and give another to a friend. If you're by yourself have them both in your mouth. Light the tobacco with a match or lighter and inhale. This device creates a lot of smoke so be ready to inhale.

 =]

Rate this Article:

Be the first to rate me.


* You must be logged in order to leave comments, please login or join us.

Comments

flavour
flavour said... on May 29th, 2009 at 10:20 PM

the only downside to this is the foil, you may not notice while you smoke but the foil is actually burning and half of what your smoking is foil chemicals. Which can be a huge problem because smoking foil can cause alzheimer’s.

Wolfram
Wolfram said... on March 5th, 2009 at 10:40 PM

What is this, a bong?  How marvellous!  Thanks!

roxanam
roxanam said... on March 5th, 2009 at 2:22 PM

very interesting!



Bookmark and Share
Sign up for our email newsletter
Name:
Email: