Xbox 360 Red Light Of Death Error Code - Meaning And How To Fix It

No doubt that Microsoft putting lot of efforts, but the Xbox 360 console is not the most stable piece of device on the technology industry. From time to time, users will inevitably facing one of the dreaded|so call “red light errors” on the system. Fear not, because not all of these problems are bring damage.

Xbox 360 Flashing Red Light Of Death, How To Fix it?

Some of them can be simple repaired, while others, like the fatal Red Ring of Error, will need the xbox device to be ship back to Microsoft for repair. Generally, Microsoft is professionally at troubleshooting a new unit out to customers who’ve experienced this problems, so conclusion it is not nothing if your Xbox 360 dies on you.

The step that the xbox 360 indicates its health to the users is via three LED rings on the front of the xbox 360. Normally these are green, but when one of them turns red, you know there is error. Here is what each of the red light issue mean and what you can do to avoid of them:

1 Red Light Of Death, 2 Red Light Of Death And 3 Red Light Of Death

1 Red Light – If one red light starts to light on the xbox 360 device, this usually shows that either a DVD drive problem or a hard drive problem. You can notice that it is by observe at the code number displayed on the screen. E64, E65 and E66 are DVD drive errors, while E67, E69 and E79 are hard disk troubles. The E74 issues shows a troubles with either the GPU or the HANA graphics scale chip. If it is a hard drive errors, try disconnecting your drive and restarting to see if that avoid the errors. If it is a DVD drive issues, your failure may have been caused by a current firmware update. Try put back to an before version of firmware, using the instructions below:

Ways to reinstall from a problems System Update:

1. With the console off, press and hold the sync up button (the small white one).
2. While holding the sync button press the power button to turn on the console.
3. Continue to hold the sync button until the Console has booted up completely.
4. During the boot process the console should clear any failed updates, allowing you to use it normally.

2 Red Lights – If you see two red lights lighting on the front of your unit, this shows an overheating problems.

You should immediately turn off your device and take it to a well ventilated place indoors to cool it down. DO NOT place your xbox 360 in a refrigerated space or put it outdoors, this will not help a thing. Just let it cool it down at room temperature for 2 hours or more. The next step, try locate it in a good-open space place and restarting. To avoid overheating, make sure that you use your 360 in the upright position, always keep it away from outside heat sources and dust, and make sure that the fans are operating properly.

3 Red Lights — This is the well know as "Red Light Of Death” problem, and it affects the largest number of Xbox 360 gamers. The name of this trouble is the “General Hardware Failure” and the issue could be tie with to multiple of things. This trouble means that somewhere inside the unit or a component is not operating properly, and it usually need a send to Microsoft to get rid. Here recommended Xbox 360 Fix Guide you can try to solve the trouble yourself.