Frisbee Wall Clock

• Your favorite frisbee
• Sticky numbers
• ruler
• clock mechanism
• battery
• drill & drill bit

Instructions:

Step 1

first make sure your Frisbee is clean and clear of any oils or dirt.

Step 2

Now you will need to measure your wall clock Frisbee to determine center. Now place a hole in the center with your drill just the size for the clock pin to fit through.

Step 3

Now put the nut and washer that came with the clock mechanism on the clock pin from the front of the Frisbee followed by the clock hands and additional nut.

Step 4

Now set the hands to read twelve o'clock. Make a little mark with a pen there and repeat for every hour.

Step 5

Now remove clock hands and apply sticker numbers where you marked your Frisbee wall clock in the previous step.

Step 6

Now put clock hands back on, Insert battery, Set time, and hang on wall.

Step 7

Now enjoy your new Frisbee wall clock that reminds you of where you have been and what time you need to leave. It's also a great conversation piece.

• when picking out your numbers remember how big your Frisbee wall clock is going to be and choose accordingly.
• when using the drill be careful as the drill is a power tool and can hurt you if you are not careful.